1 bag of 100 pieces, M3, 6mm, button head socket bolts for 15x15mm (MakerBeamXL).

1 bag with 4 Shaft clamp pieces (2 shaft clamps) for 15x15mm ( MakerBeamXL and OpenBeam)

12 pieces of right angle (90 degree) brackets - MakerBeam

1 bag (12 pieces) of MakerBeam corner cubes clear, 10mmx10mmx10mm

22 black MakerBeamXS (5mmx5mm) of different lengths, 72 brackets, 1 bag of M1.2x2 Phillips Pan Head screws (± 200 pieces), 1 bag of T slot nuts for MakerBeamXS (± 200 pieces), a pair of tweezers and a screw driver.

1 bag of MakerBeamXS standoffs black contains 12 pieces and (±) 24 M1.2 x 3,5mm Phillips Pan Head screws. The standoffs are designed for MakerBeamXS (5mmx5mm).

The bag contains 50 bolts, an allen key and a drill bit to create M3 size holes. With these items and a drill you have all the items to fasten two beams without a bracket on the outside. It offers you a blind fastening method.

22 clear MakerBeamXS (5mmx5mm) of different lengths, 72 brackets, 1 bag of M1.2x2 Phillips Pan Head screws (± 200 pieces), 1 bag of T slot nuts for MakerBeamXS (± 200 pieces), a pair of tweezers and a screw driver.

1 bag (100 pieces) of M3 self locking nuts for both MakerBeam and OpenBeam

1 piece clear anodised 1500mm MakerBeam (10mmx10mm, hollow core, threaded)

1 set of 9 pieces of clear anodised MakerBeamXS in the following lengths: 20mm, 30mm, 40mm, 50mm, 60mm, 70mm, 80mm, 90mm and 100mm. MakerBeamXS width and height = 5mm x 5mm.

40 clear MakerBeamXL (15x15mm) of different lengths, 12 black anodised corner cubes (15x15x15mm), 48 brackets, 1 bag of hexagon bolts, 1 bag of button head socket bolts and nuts packed in a good quality storage box.

An extra linear slide carriage for our linear slides or linear guide rails 103611 (300mm) and 103622 (600mm).

1 pack (4 pieces) black anodised 100mm MakerBeamXL (15x15mm, hollow core, threaded, smooth surface)

1 bag with 25 pieces T-slot nuts. This is article number 101619 without bolts.

With this 'beam lengthening set,' you can easily extend beams for your MakerBeam project. Fastening is straightforward, and three sides remain blind. This design allows for sheets to be added more easily.

1 bag (10 pieces) of bearings for MakerBeam, 10 M3 10mm MakerBeam squareheaded bolts with hex hole, 10 washers, 10 M3 nuts and 10 M3 self locking nuts.

1 piece NEMA 17 stepper bracket for MakerBeam in stainless steel

1 bag of MakerBeamXS pivot hinges contains 12 pieces. The pivot hinges are designed for MakerBeamXS (5mmx5mm).

1 bag with 8 hinge pieces. Together 4 hinges with axes and self locking nuts