1 bag with 100gram polymorph-thermoplastic

12 pieces of right angle (90 degree) brackets - MakerBeam

1 piece black anodised 1000mm MakerBeamXL (15mmx15mm, hollow core, threaded, smooth surface)

1 bag (10 pieces) of bearings for MakerBeam, 10 M3 10mm MakerBeam squareheaded bolts with hex hole, 10 washers, 10 M3 nuts and 10 M3 self locking nuts.

1 bag (12 pieces) of MakerBeam straight brackets.

1 piece clear anodised 600mm MakerBeam (10mmx10mm, hollow core, threaded)

The bag contains 50 bolts, an allen key and a drill bit to create M3 size holes. With these items and a drill you have all the items to fasten two beams without a bracket on the outside. It offers you a blind fastening method.

1 set of 9 pieces of blue anodised MakerBeamXS in the following lengths: 20mm, 30mm, 40mm, 50mm, 60mm, 70mm, 80mm, 90mm and 100mm. MakerBeamXS width and height = 5mm x 5mm.

22 black MakerBeamXS (5mmx5mm) of different lengths, 72 brackets, M1.2x2 Phillips Pan Head screws (± 200 pcs), T slot nuts for MakerBeamXS (± 200 pcs), tweezers, work mat, standoffs and a screw driver all packed in a good quality storage box.

1 pack (4 pieces) black anodised 100mm MakerBeamXL (15x15mm, hollow core, threaded, smooth surface)

The triangle bracket is designed to match MakerBeamXL or OpenBeam, both 15x15mm profiles. A bag of triangle brackets for MakerBeamXL holds 12 pieces.

22 clear MakerBeamXS (5mmx5mm) of different lengths, 72 brackets, M1.2x2 Phillips Pan Head screws (± 200 pcs), T slot nuts for MakerBeamXS (± 200 pcs), tweezers, work mat, standoffs and a screw driver all packed in a good quality storage box.

1 bag of MakerBeamXS M1.2 x 2mm Phillips Pan Head Screws contains (±) 200 pieces.

1 pack (4 pieces) black anodised 300mm OpenBeam (15mmx15mm, hollow core, NOT threaded)

12 pieces stainless steel T shaped brackets that are best suited for profiles with a 15x15mm diameter like OpenBeam.

1 piece black anodised 600mm MakerBeam (10mmx10mm, hollow core, threaded)

1 piece of 300mm clear anodised MakerBeamXS. MakerBeamXS width and height = 5mm x 5mm.

22 clear MakerBeamXS (5mmx5mm) of different lengths, 72 brackets, 1 bag of M1.2x2 Phillips Pan Head screws (± 200 pieces), 1 bag of T slot nuts for MakerBeamXS (± 200 pieces), a pair of tweezers and a screw driver.

1 piece polystyrene sheet, 300mmx200mmx3mm (+/-), white

1 piece clear anodised 900mm MakerBeam (10mmx10mm, hollow core, threaded)