1 bag with 100gram polymorph-thermoplastic

1 piece of 600mm black anodised MakerBeamXS. MakerBeamXS width and height = 5mm x 5mm.

22 black MakerBeamXS (5mmx5mm) of different lengths, 72 brackets, M1.2x2 Phillips Pan Head screws (± 200 pcs), T slot nuts for MakerBeamXS (± 200 pcs), tweezers, work mat, standoffs and a screw driver all packed in a good quality storage box.

1 bag of MakerBeamXS M1.2 T slot nuts contains (±) 200 pieces. The T slot nuts are designed for MakerBeamXS (5mmx5mm) and are made of plated steel.

Sponge rubber rectangular cord for MakerBeamXL, 6x6mm. Length: 2m.

The rubber can be used to create surface protection.

1 bag (50 bolts) of MakerBeam square headed bolts with hex hole M3, 20mm

1 piece of 600mm linear slide rail (600mm x 9mm x 6,5mm) and carriage (29mm x 20mm x 8mm)

1 bag (10 pieces) of bearings for MakerBeam, 10 M3 10mm MakerBeam squareheaded bolts with hex hole, 10 washers, 10 M3 nuts and 10 M3 self locking nuts.

12 pieces of 45 degree brackets - MakerBeam

1 set of 9 pieces of blue anodised MakerBeamXS in the following lengths: 20mm, 30mm, 40mm, 50mm, 60mm, 70mm, 80mm, 90mm and 100mm. MakerBeamXS width and height = 5mm x 5mm.

A MakerBeamXS regular starter kit contains: 22 blue MakerBeamXS (5mmx5mm) of different lengths, 72 brackets, 1 bag of M1.2x2mm Phillips Pan Head screws (± 200 pcs), 1 bag of T slot nuts for MakerBeamXS (± 200 pcs), a pair of tweezers and a screw driver.

1 piece clear anodised 500mm MakerBeamXL (15mmx15mm, hollow core, threaded, smooth surface)

A variety of lengths black anodised openbeams (15mmx15mm) packed together with brackets, bolts, drivers, nuts and end caps in a multi usage box.

The MakerBeamXL triangle bracket black anodised is designed to match MakerBeamXL or OpenBeam, both 15x15mm profiles. A bag contains 12 brackets.

12 T-brackets - MakerBeam (MakerBeamXL and OpenBeam compatible)

1 piece NEMA 17 stepper bracket for MakerBeam in stainless steel

22 black MakerBeamXS (5mmx5mm) of different lengths, 72 brackets, 1 bag of M1.2x2 Phillips Pan Head screws (± 200 pieces), 1 bag of T slot nuts for MakerBeamXS (± 200 pieces), a pair of tweezers and a screw driver.

4 pieces of MakerBeamXL 3D printed end caps. You can screw these end caps under the MakerBeamXL beams (15x15mm). These end caps can also be used to protect the sides. The 3D printed end caps are NOT compatible with OpenBeam unless you create tapped ends

1 bag (50 pieces) of M3 cap nuts for both MakerBeam and OpenBeam

1 pack (4 pieces) black anodised 150mm MakerBeamXL (15x15mm, hollow core, threaded, smooth surface)