1 bag with 25 pieces T-slot nuts, 25 bolts ISO7380, 4mm and 25 bolts DIN7991, 4mm

50 black makerbeams (10x10mm) of different lengths, 60 brackets, a bag of bolts and nuts and a hex nut driver packed in a plastic case

1 set of 9 pieces of black anodised MakerBeamXS in the following lengths: 20mm, 30mm, 40mm, 50mm, 60mm, 70mm, 80mm, 90mm and 100mm. MakerBeamXS width and height = 5mm x 5mm.

1 pack (4 pieces) black anodised 300mm MakerBeamXL (15x15mm, hollow core, threaded, smooth surface)

1 bag of MakerBeamXL T brackets black anodised contains 12 pieces. Black anodised T brackets are designed to match MakerBeamXL or OpenBeam, both 15x15mm profiles.

1 hex nut driver (100461), beams black 40 and 60mm (100056, 100067) and clear 100mm (100168), 1 corner cube black (100988), 1 T-slot nut (101619), 1 right angle bracket (100326), 1 60 degree bracket (100292), 10 square headed screws (100359), 10 nuts (10

1 pack (4 pieces) black anodised 200mm MakerBeamXL (15x15mm, hollow core, threaded, smooth surface)

1 bag with 50 pieces T-slots nuts for MakerBeamXL (50p) and OpenBeam

1 bag (250 bolts) of MakerBeam square headed bolts with hex hole M3, 6mm

1 bag (12 pieces) of MakerBeam corner cubes black, 10mmx10mmx10mm

One cut to create a custom length of MakerBeamXL (15x15mm) from an MakerBeamXL length in your order. This product is created to offer custumers the opportunity to get a specific length of MakerBeamXL (15x15mm).

1 piece polycarbonate sheet, 300mmx200mmx3mm (+/-), transparent

Linear slide kit: 5 pieces T-slot nuts for MakerBeam and 10 pieces 5mm button head socket bolts M3. For fastening the linear slide rail with T-slot nuts you need 5mm bolts (M3).

One cut to create a custom length of MakerBeam (10x10mm) from an MakerBeam length in your order. This product is created to offer custumers the opportunity to get a specific length of MakerBeam (10x10mm).

12 pieces of corner brackets - MakerBeam

40 black MakerBeamXL (15x15mm) of different lengths, 48 brackets, 1 bag of hexagon bolts, 1 bag of button head socket bolts and nuts packed in a plastic case.

The triangular inner corner bracket will add even more stiffness and rigidity to your design.

With this 'beam lengthening set,' you can easily extend beams for your MakerBeam project. Fastening is straightforward, and three sides remain blind. This design allows for sheets to be added more easily.

Sponge rubber rectangular cord, 5x5mm. Length: 2m.

The rubber can be used to create surface protection.

1 bag (250 pieces) of M3 regular nuts for both MakerBeam, MakerBeamXL and OpenBeam