1 piece of 200mm linear slide rail (200mm x 9mm x 6,5mm) and carriage (29mm x 20mm x 8mm)

12 pieces of corner brackets - MakerBeam

The bag contains 50 bolts, an allen key and a drill bit to create M3 size holes. With these items and a drill you have all the items to fasten two beams without a bracket on the outside. It offers you a blind fastening method.

Gooseneck, 1 piece, M3 female and male end, black, Electroplated steel gooseneck, 5mm in diameter, 200mm in length.

1 bag with 8 hinge pieces. Together 4 hinges with axes and self locking nuts

40 clear MakerBeamXL (15x15mm) of different lengths, 12 black anodised corner cubes (15x15x15mm), 48 brackets, 1 bag of hexagon bolts, 1 bag of button head socket bolts and nuts packed in a good quality storage box.

50 clear makerbeams (10x10mm) of different lengths, 60 brackets, 12 corner cubes clear, a bag of bolts and nuts and a hex nut driver packed in multi usage storage box

1 bag (250 bolts) of MakerBeam square headed bolts with hex hole M3, 6mm

1 piece black anodised 1500mm MakerBeam (10mmx10mm, hollow core, threaded)

With this 'beam lengthening set,' you can easily extend beams for your MakerBeam project. Fastening is straightforward, and three sides remain blind. This design allows for sheets to be added more easily.

50 clear makerbeams (10x10mm) of different lengths, 60 brackets, a bag of bolts and nuts and a hex nut driver packed in a plastic case

1 set of 9 pieces of clear anodised MakerBeamXS in the following lengths: 20mm, 30mm, 40mm, 50mm, 60mm, 70mm, 80mm, 90mm and 100mm. MakerBeamXS width and height = 5mm x 5mm.

The triangular inner corner bracket will add even more stiffness and rigidity to your design.

1 bag with 12 black anodised corner cubes for MakerBeamXL and OpenBeam, 15mmx15mmx15mm

An extra linear slide carriage for our linear slides or linear guide rails 103611 (300mm) and 103622 (600mm).

1 bag of MakerBeamXL T brackets black anodised contains 12 pieces. Black anodised T brackets are designed to match MakerBeamXL or OpenBeam, both 15x15mm profiles.

The sample bag offers you a premium MakerBeamXS screw driver, a few beams and some fasteners (corner, square and T-bracket).

Sponge rubber cord, 5x5mm. Length: 2m.

The rubber can be used to create surface protection.

1 piece of 750mm linear slide rail (750mm x 9mm x 6,5mm) and carriage (29mm x 20mm x 8mm)

1 bag (4 pieces) of M3 knurled nuts for both MakerBeam and OpenBeam