1 bag of MakerBeamXS corner brackets contains 12 pieces. The brackets are designed for MakerBeamXS (5mmx5mm) and are made of plated steel.

1 storage box with multiple compartments both suited for MakerBeam and OpenBeam kits

1 piece black anodised 2000mm MakerBeamXL (15mmx15mm, hollow core, threaded, smooth surface) Please note: different shipping cost for USA-customers

4 Black Vinyl End Caps for 15x15mm aluminum profiles like MakerBeamXL and OpenBeam

1 cutting mat, size approximately 30cmx21cm

1 bag of MakerBeamXS square brackets contains 12 pieces. The brackets are designed for MakerBeamXS (5mmx5mm) and are made of plated steel.

1 bag T-slot nuts long contains 12 pieces of long T-slot nuts for MakerBeamXL.

1 bag with 100 pieces thread forming screws for OpenBeam and a syringe with 2ml grease for tapping the ends of the extrusions.

A variety of lengths black anodised openbeams (15mmx15mm) packed together with MakerBeamXL brackets, bolts, drivers, nuts and vinyl end caps in a hard plastic case.

1 piece black anodised 750mm MakerBeamXL (15mmx15mm, hollow core, threaded, smooth surface)

1 bag with 1 eye plate for MakerBeam (OpenBeam compatible)

1 pack (8 pieces) clear anodised 60mm MakerBeam (10mmx10mm, hollow core, threaded)

Sponge rubber rectangular cord for MakerBeamXL, 6x6mm. Length: 2m.

The rubber can be used to create surface protection.

1 pack (4 pieces) clear anodised 50mm MakerBeamXL (15x15mm, hollow core, threaded, smooth surface)

22 black MakerBeamXS (5mmx5mm) of different lengths, 72 brackets, 1 bag of M1.2x2 Phillips Pan Head screws (± 200 pieces), 1 bag of T slot nuts for MakerBeamXS (± 200 pieces), a pair of tweezers and a screw driver.

1 pack (8 pieces) clear anodised 40mm MakerBeam (10mmx10mm, hollow core, threaded)

1 bag of MakerBeamXS 60 degree V brackets contains 12 pieces. The brackets are designed for MakerBeamXS (5mmx5mm) and are made of plated steel.

1 bag of MakerBeam straight brackets contains 12 pieces. The brackets are designed for MakerBeamXS (5mmx5mm). The brackets are made of plated steel.

A bag contains 12 M3 eye nuts and 12 washers.

4 pieces of MakerBeamXL 3D printed end caps. You can screw these end caps under the MakerBeamXL beams (15x15mm). These end caps can also be used to protect the sides. The 3D printed end caps are NOT compatible with OpenBeam unless you create tapped ends