1 pack (16 pieces) clear anodised 100mm MakerBeam (10mmx10mm, hollow core, threaded).

1 pack (8 pieces) clear anodised 60mm MakerBeam (10mmx10mm, hollow core, threaded)

1 bag of MakerBeamXS pivot hinges contains 12 pieces. The pivot hinges are designed for MakerBeamXS (5mmx5mm).

1 bag of MakerBeam straight brackets contains 12 pieces. MakerBeam XLstraight brackets are made of stainless steel.

1 Hex key driver M3 suited for both MakerBeam and OpenBeam

1 bag (50 pieces) of M3 cap nuts for both MakerBeam and OpenBeam

1 pack (6 pieces) clear anodised 150mm MakerBeam (10mmx10mm, hollow core, threaded)

4 pieces of MakerBeamXL 3D printed end caps. You can screw these end caps under the MakerBeamXL beams (15x15mm). These end caps can also be used to protect the sides. The 3D printed end caps are NOT compatible with OpenBeam unless you create tapped ends

1 piece Stepper bracket flat for MakerBeam

1 pack (8 pieces) clear anodised 40mm MakerBeam (10mmx10mm, hollow core, threaded)

1 piece clear anodised 750mm MakerBeamXL (15mmx15mm, hollow core, threaded, smooth surface)

1 bag with 100 pieces thread forming screws for OpenBeam and a syringe with 2ml grease for tapping the ends of the extrusions.

1 piece Servo bracket for MakerBeam in stainless steel

22 blue MakerBeamXS (5mmx5mm) of different lengths, 72 brackets, M1.2x2 Phillips Pan Head screws (± 200 pcs), T slot nuts for MakerBeamXS (± 200 pcs), tweezers, work mat, standoffs and a screw driver all packed in a good quality storage box.

A variety of lengths black anodised openbeams (15mmx15mm) packed together with MakerBeamXL brackets, bolts, drivers, nuts and vinyl end caps in a hard plastic case.

3 piece black anodised 750mm MakerBeamXL for a Kossel 3D printer (15mmx15mm, hollow core, threaded, smooth surface)

1 bag of MakerBeamXL T brackets black anodised contains 12 pieces. Black anodised T brackets are designed to match MakerBeamXL or OpenBeam, both 15x15mm profiles.

1 pack (4 pieces) clear anodised 50mm MakerBeamXL (15x15mm, hollow core, threaded, smooth surface)

1 piece of screw driver for MakerBeamXS

1 bag of MakerBeamXS 60 degree V brackets contains 12 pieces. The brackets are designed for MakerBeamXS (5mmx5mm) and are made of plated steel.