Accessories matching our 15mmx15mm profiles

Sponge rubber rectangular cord for MakerBeamXL, 6x6mm. Length: 2m.

The rubber can be used to create surface protection.

1 bag with 1 eye plate for MakerBeam (OpenBeam compatible)

A bag contains 12 M3 eye nuts and 12 washers.

1 bag with 4 standoffs or spacers, washers and nuts

Gooseneck, 1 piece, M3 female and male end, black, Electroplated steel gooseneck, 5mm in diameter, 200mm in length.

4 Black Vinyl End Caps for 15x15mm aluminum profiles like MakerBeamXL and OpenBeam

4 pieces of MakerBeamXL 3D printed end caps. You can screw these end caps under the MakerBeamXL beams (15x15mm). These end caps can also be used to protect the sides.

1 bag with 100gram polymorph-thermoplastic

1 piece polystyrene sheet, 300mmx200mmx3mm (+/-), black

1 piece polycarbonate sheet, 300mmx200mmx3mm (+/-), transparent

1 piece polystyrene sheet, 300mmx200mmx3mm (+/-), white

1 bag with 4 Shaft clamp pieces (2 shaft clamps) for 15x15mm ( MakerBeamXL and OpenBeam)

One cut and a new tap for a custom cut length of MakerBeamXL (15x15mm) for customers that want a specific length of MakerBeamXL

Bag contains:
1. a coupon code for 10% discount
2. a hex nut driver (100461)
3. a hex key driver (100450)
4. beams black/clear 50mm (103138/103374103149)
5. beams black/clear 100mm (103149/103385)
6. 1 corner cube black/clear (103105/100922)
7. T s

1 Hex nut driver M3 suited for both MakerBeam, MakerBeamXL and OpenBeam

1 Hex key driver M3 suited for both MakerBeam and OpenBeam

1 storage box with multiple compartments both suited for MakerBeam and OpenBeam kits