Accessories matching our 10x10mm profiles

A bag contains 12 M3 eye nuts and 12 washers.

1 bag (10 pieces) of bearings for MakerBeam, 10 M3 12mm MakerBeam squareheaded bolts with hex hole, 10 washers, 10 M3 nuts and 10 M3 self locking nuts.

1 bag (5 pieces) of hinge bearings for MakerBeam, 10 bearings, 5 copper saddles,

1 Hex key driver M3 suited for both MakerBeam and OpenBeam

1 Hex nut driver M3 suited for both MakerBeam, MakerBeamXL and OpenBeam

Sponge rubber rectangular cord, 5x5mm. Length: 2m.

The rubber can be used to create surface protection.

1 bag of 4 pieces black 3D printed end caps black for MakerBeam

1 bag of 4 pieces black vinyl end caps for MakerBeam

1 bag with 1 eye plate for MakerBeam (OpenBeam compatible)

1 bag with 100gram polymorph-thermoplastic

1 piece polystyrene sheet, 300mmx200mmx3mm (+/-), black

1 piece polystyrene sheet, 300mmx200mmx3mm (+/-), white

1 piece polycarbonate sheet, 300mmx200mmx3mm (+/-), transparent

1 bag with 4 standoffs or spacers, washers and nuts

1 bag with 8 hinge pieces. Together 4 hinges with axes and self locking nuts

2 pieces of magnets for MakerBeam. These two tiny magnets come with rubber caps and the self-adhesive metal discs.

Gooseneck, 1 piece, M3 female and male end, black, Electroplated steel gooseneck, 5mm in diameter, 200mm in length.

1 storage box with multiple compartments both suited for MakerBeam and OpenBeam kits

1 hex nut driver (100461), beams black 40 and 60mm (100056, 100067) and clear 100mm (100168), 1 corner cube black (100988), 1 T-slot nut (101619), 1 right angle bracket (100326), 1 60 degree bracket (100292), 10 square headed screws (100359), 10 nuts (10

One cut and a new tap for a custom cut length of MakerBeam (10x10mm) for customers who want a specific length of MakerBeam.